How to Install a DIY Stair Runner

1. Staying Centered

Jaime used painter’s tape to make sure the runner would be centered on the stairs.

2. Padding

She cut padding—a thin sheet of felt usually sold as underlayment for laminate flooring—into rectangles slightly narrower than the width of the runner.

3. Adhering to Detail

She adhered the padding to the treads with blue double-sided carpet tape, pulling the felt over the nose of each step. Then she added more carpet tape for the runner.

4. One Step at a Time

Starting from the top, Jaime affixed the runner, securing it with staples in the corners of each tread and along the top and bottom edges. She used a painter’s 5-in-1 tool to smooth the runner over the steps’ risers and finished it off with square upholstery tacks.

Tools

DIY Stair Runner Install One in 4 Steps - 69DIY Stair Runner Install One in 4 Steps - 53DIY Stair Runner Install One in 4 Steps - 25DIY Stair Runner Install One in 4 Steps - 20DIY Stair Runner Install One in 4 Steps - 65DIY Stair Runner Install One in 4 Steps - 7DIY Stair Runner Install One in 4 Steps - 33DIY Stair Runner Install One in 4 Steps - 63